sagemcom router mac os x system requirements

SAGEMCOM ROUTER MAC OS X SYSTEM REQUIREMENTS INSTALL

You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. (2) This device must accept any interference received, including interference that may cause undesired operation. (1) This device may not cause harmful interference, and Operation is subject to the following two conditions: 253923819 20 July 2021 1 Safety and Certifications Federal Communications Commission (FCC) Statements This device complies with Part 15 of the FCC Rules. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. Altitude: 2743 meters (9000feet) maximum. Use the product in the environment specified as below:Īir temperature between 0C (32 F) and +45C (113 F). It is not allowed to connect to public cable distribution or cable television network. To disconnect this equipment from AC power, unplug the power supply from the AC wall socket. If service is required, disconnect all power from the equipment and consult qualified service personnel.

This equipment is not user serviceable and is to be serviced by qualified personnel only. Do not use liquid cleaners or aerosol cleaners. Care should be taken to ensure that the power cord is routed, so it is not likely to be walked on or pinched by items placed upon or next to it. The equipment should be situated away from heat sources such as radiators, heat registers, stoves, or other heat producing appliances and equipment. Do not place equipment in a built-in installation such as a cabinet that may impede the flow of air through the ventilation openings. Avoid blocking any vent openings or exhaust exits on this equipment. Doing so can result in the risk of fire or electrical shock. Do not overload wall outlets or extension cords. This equipment should only be operated with the type of power supply (Voltage and Current) indicated on the easily accessed power outlet.

As the power adapter is the only way to connect to the electrical network, the product must be installed near an 6. Never insert objects into the vents of this equipment as this can result in the risk of electrical shock or fire. If you place it on a soft surface, such as rug, sofa or cushion, the vents may be blocked, causing the product to overheat. If you put it on something unsteady, it may fall and be damaged. Place your product on a firm, solid surface, no obstacle at a minimum distance of 20cm (0.65feet).

SAGEMCOM ROUTER MAC OS X SYSTEM REQUIREMENTS INSTALL

This equipment is for indoor use only, do not place or install in an outdoor location. Care should be taken so that liquids are not spilled on this equipment. For example, does not use near a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Do not use this product near water and avoid contact with moisture. When using this device, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons including the following:ġ. This port only used to transmit the signal data. Battery: Use to connect to the battery with USC Link cable provided by dedicated battery vendor. Repeat as necessary with the other available Ethernet ports. Then connect the other end of the Ethernet Cable to the Ethernet port of a computer. For connection of a computer with an Ethernet cable use one of the RJ45 ports on the product marked '1', '2'. Connect the Ethernet cable (provided) to the RJ45 port labeled wan on one end and to the Internet access device provided by your ISP on the other end. Connect the FAST 5290 to the AC Mains in accordance with the installation instructions in this booklet, and the markings on the identification label (voltage, current, and frequency of electricity network).

Only use a manufacturer supplied and approved power adapter, power cord and Ethernet cable. The FAST 5290 router requires the use of a 12VDC, 4.1A power adapter. Connect the manufacturer supplied AC to DC power adapter. Place the router in a vertical orientation on a flat surface. Installation and Safe Usage Instructions:ġ. Safety and Certifications Important Information about the Sagemcom FAST 5290 (FWR226e):

Sagemcom router mac os x system requirements